Climate change and an intensifying appetite for silicon wafers and chips put water supplies and global supply chains at risk.
212,000,000 liters – that’s how much water TSMC1, one of the world’s leading chipmakers, consumes per day, according to its 2020 Corporate Social Responsibility Report. That would be enough to satisfy the daily water needs of nearly 1.5 million Europeans. Yet it is the amount of water necessary to produce microchips the size of a human fingernail that are embedded in devices all around us.
Making the tiny chips that power billions of electronic devices we use every day is a water-intensive process. The estimated water footprint of a single microchip in a smartphone or laptop can go as high as 30 liters. That figure runs even higher for silicon wafers that contain hundreds of multi-layered microchips. With each additional wafer layer, circuits and conductive material must be chemically etched and meticulously cleaned – processes that require vast amounts of ultra-purified water.
As high as that figure may be now, it will almost certainly move higher, not just for TSMC but for the entire semiconductor industry as the digital economy expands across economic sectors and geographic regions. Figure 1 shows how the volume of water used to manufacture each layer of a 200 mm semiconductor wafer has risen precipitously in the past few years as chips have grown denser and more sophisticated.
As global chip production ramps up, water supplies are drawing down to alarmingly low levels. Taiwan, TSMC’s headquarters and a major semiconductor hub for the world, has been struggling with periodic droughts. The most recent was so bad that earlier in 2021, the government cut water supplies to TSMC and other major tech firms by 15% and said it would stiffen restrictions further if shortages persisted.
As global chip production ramps up, water supplies are drawing down to alarmingly low levels
To maintain chip production, TSMC chartered trucks to bring in fresh water from other parts of the country. Thanks to these stop-gap extremes, the company was able to, at least temporarily, avert production issues. However, that may change, as global warming continues to upset global weather systems, making droughts more frequent, more prolonged, and more geographically extensive.
Taiwan is not alone in its water worries. Water stress and scarcity are growing increasingly into a global water crisis. Half a billion people live in a state of constant water scarcity and half the world’s population (3.9 billion) experience water scarcity at some point in the year. Population growth, worldwide industrialization, energy production and climate change are all stressing water supplies. The UN estimates that by 2030, global demand for water will exceed supply by 40%.
Nor is TSMC an isolated case among semiconductor producers. Technology hubs are oftentimes located in dry, arid regions, with companies being attracted by the low humidity, cooler temperatures, cheap land and generous subsidies. Popular states for chip factories (or “fabs”) and data centers in the US include Texas, New Mexico, Arizona, California and Oregon. Elsewhere, the distribution of chip fabs and tech hubs show a similar pattern with locations in Israel, Northern China, Singapore – all areas prone to water-stress.
To ensure uninterrupted water supplies for operations, many deep-pocketed chipmakers such as TSMC and its North American-based rival Intel2 are building their own water treatment plants. These mini-utilities will capture, clean and recycle industrial effluent for re-use in production and cooling processes. TSMC will open a state-of-the-art water treatment plant in the southwestern city of Tainan by the end of 2021 and Intel has invested significantly in on-site water treatment facilities for its fabs in Oregon, Arizona and Israel.
All of this entails investments in pipes, valves and heavy infrastructure, water filtration and cleaning technologies, as well as advanced analytical systems for testing, detecting, and monitoring micropollutants and water quality. Moreover, a surging interest in water investments is not exclusive to semiconductor manufacturers. From metals to mining, textiles to timber, agriculture to automobiles, corporate valuations of water-related assets are changing. Water’s status as a precious resource and critical production factor is finally being recognized. Without water, there would be no industrial output and no economic growth.
For more than two decades, Robeco’s water strategy has been investing in attractive companies providing effective solutions across the water value chain. Our accumulated knowledge and expertise will help investors navigate the road ahead as climate change intensifies the need for investments that help companies, cities and communities use water more efficiently.
1 This is not a buy, sell or hold recommendation for any particular security.
2 This is not a buy, sell or hold recommendation for any particular security.
Ogni mese leggiamo statistiche straordinarie che riguardano il trends investing e gli investimenti tematici. Cosa significano? Quali sono gli effetti per gli investitori?
Confermo di essere un cliente professionale
Le informazioni e le opinioni contenute in questa sezione del Sito cui sta accedendo sono destinate esclusivamente a Clienti Professionali come definiti dal Regolamento Consob n. 16190 del 29 ottobre 2007 (articolo 26 e Allegato 3) e dalla Direttiva CE n. 2004/39 (Allegato II), e sono concepite ad uso esclusivo di tali categorie di soggetti. Ne è vietata la divulgazione, anche solo parziale.
Al fine di accedere a tale sezione riservata, si prega di confermare di essere un Cliente Professionale, declinando Robeco qualsivoglia responsabilità in caso di accesso effettuato da una persona che non sia un cliente professionale.
In ogni caso, le informazioni e le opinioni ivi contenute non costituiscono un'offerta o una sollecitazione all'investimento e non costituiscono una raccomandazione o consiglio, anche di carattere fiscale, o un'offerta, finalizzate all'investimento, e non devono in alcun caso essere interpretate come tali.
Prima di ogni investimento, per una descrizione dettagliata delle caratteristiche, dei rischi e degli oneri connessi, si raccomanda di esaminare il Prospetto, i KIIDs delle classi autorizzate per la commercializzazione in Italia, la relazione annuale o semestrale e lo Statuto, disponibili sul presente Sito o presso i collocatori.
L’investimento in prodotti finanziari è soggetto a fluttuazioni, con conseguente variazione al rialzo o al ribasso dei prezzi, ed è possibile che non si riesca a recuperare l'importo originariamente investito.