The findings were part of a series of studies from the World Bank investigating the economic and environmental impact of applying circular economy principles within industries. The study analyzed the plastic supply chains of Malaysia, the Philippines and Thailand, and found that 75% of plastic that could have been recycled had been discarded. This means that almost 5 million of the 6.5 million metric tons of plastic produced is either hauled to trash heaps, dumped in oceans, burned in incinerators or simply scrapped as litter in the open environment.1
Researchers focused more specifically on the most easily recyclable plastic resins used in beverage bottles, plastic bags, cleaning sprays and food packaging, known otherwise by their chemical names of PET (polyethylene terephthalate), LDPE (low-density polyethylene), HDPE (high-density polyethylene) and PP (polypropylene). Plastic resins like these are classified as thermoplastics which can be softened and molded under high heat and pressure making them easier to convert and reuse for other products or processes.
This means that plastic trash still carries significant economic value if salvaged. Yet, despite the existence of recycling technologies, most plastic is ditched – along with its economic potential.
Emerging markets represent only a small fraction of a worldwide problem. According to a World Economic Forum panel of experts, 400 million metric tons of plastic is produced each year globally – of which only 14-18% is recycled. If the World Bank’s valuations for Southeast Asia were applied to global plastic volumes, it would mean USD 370 billion of material assets are dumped each year.2
Losses like these are not only economically wasteful but also environmentally damaging. Discarded plastic enters oceans, leaks in landfills, litters natural landscapes and, when burned, contributes to global warming.
The UNDP estimates 13 million metric tons of plastic waste (or one garbage truck per minute) are added to oceans annually, entangling marine creatures, ensnarling coral reefs, and littering sea beds. Scientists put damage to oceanic and marine ecosystems at USD 2.5 trillion. 3,4
Moreover, the production and incineration of plastic creates more than 850 million metric tons of greenhouse gases each year – which is equal to the emissions of more than 180 million gas-powered cars.5,6
The world’s consumption and production of plastic is in desperate need of a reboot.
According to Pieter Busscher, portfolio manager of the Robeco Smart Materials strategy, the problem with plastics is a dilemma faced in many industries—how to efficiently produce the materials needed for economic growth while effectively managing the waste produced in the process. “We look at companies that provide solutions to make the manufacturing cycle more efficient and less resource intensive. A key feature of the strategy is investing in companies turning industrial waste, like plastic, into valuable materials that can be reused across industries.”
Meanwhile Robeco’s Circular Economy strategy attacks plastic overproduction and excess waste with an entire arsenal of approaches ranging from biodegradable packaging and recycling to digital platforms that share, track and trace products before, during and after use. “It might be counterintuitive,” says the strategy’s portfolio manager, David Kägi, “but to effectively combat pollution, companies need to think about waste during product design, manufacturing, and use and not just at the end of the product’s life. We focus on companies across a wide spectrum of sectors that are successfully adopting this approach.”
1The World Bank Group 2021. Plastic Circularity Market Study Series: Thailand, Malaysia, and the Philippines. March 2021. Marine Plastics Series, East Asia and Pacific Region. Washington DC.
2World Economic Forum. Plastics, the Circular Economy and Global Trade. White Paper. July 2020. Cologny/Geneva Switzerland.
3Volume of plastic. United Nations Development Program, UNDP. The Great Garbage Patch. A tidal wave of plastic. https://feature.undp.org/plastic-tidal-wave/#article
4 Cost to marine ecosystems. N. Beaumont, M. Aanesen et al. Global ecological, social and economic impacts of marine plastic. Vol. 142. May 2019. Pp 189-195. https://www.sciencedirect.com/science/article/pii/S0025326X19302061
5Center for International Environmental Law (May 2019). Plastic and Climate: the Hidden Costs of a Plastic Planet. White Paper Report.
6Comparative car emissions calculated using the US Environmental Protection Agency, greenhouse gas emissions calculator, https://www.epa.gov/energy/greenhouse-gas-equivalencies-calculator
Confermo di essere un cliente professionale
Le informazioni e le opinioni contenute in questa sezione del Sito cui sta accedendo sono destinate esclusivamente a Clienti Professionali come definiti dal Regolamento Consob n. 16190 del 29 ottobre 2007 (articolo 26 e Allegato 3) e dalla Direttiva CE n. 2004/39 (Allegato II), e sono concepite ad uso esclusivo di tali categorie di soggetti. Ne è vietata la divulgazione, anche solo parziale.
Al fine di accedere a tale sezione riservata, si prega di confermare di essere un Cliente Professionale, declinando Robeco qualsivoglia responsabilità in caso di accesso effettuato da una persona che non sia un cliente professionale.
In ogni caso, le informazioni e le opinioni ivi contenute non costituiscono un'offerta o una sollecitazione all'investimento e non costituiscono una raccomandazione o consiglio, anche di carattere fiscale, o un'offerta, finalizzate all'investimento, e non devono in alcun caso essere interpretate come tali.
Prima di ogni investimento, per una descrizione dettagliata delle caratteristiche, dei rischi e degli oneri connessi, si raccomanda di esaminare il Prospetto, i KIIDs delle classi autorizzate per la commercializzazione in Italia, la relazione annuale o semestrale e lo Statuto, disponibili sul presente Sito o presso i collocatori.
L’investimento in prodotti finanziari è soggetto a fluttuazioni, con conseguente variazione al rialzo o al ribasso dei prezzi, ed è possibile che non si riesca a recuperare l'importo originariamente investito.